Abby May.12nd 2022

The best all terrain electric skateboard

Hey eSkaters,

I’ve got the Maxfind FF AT electric skateboard to review today and I am becoming more and more impressed by the Maxfind line up lately.

The FF AT is a well designed electric skateboard packed with features and comforts that make your riding experience really enjoyable.

 I’m talking quick-swap battery, puncture-free tyres and auto-start, among a bunch of others that we’ll go into throughout this review.

Who Is It For? 

The Maxfind FF AT is the perfect commuter electric skateboard because it is extremely comfortable to ride and tackles imperfect paths without any worries.

If you’re into riding off-road, the FF AT is great for you because the all-terrain tires can handle most surfaces including compact gravel, dirt and grass.

If you’re not into all-terrain riding but you like all the features that come with this board, you can check out the FF-Belt which is almost the same eboard, except it has belt motors and urban street wheels. Or the FF-Plus which has hub motor urban street wheels.

Deck

The Maxfind FF AT deck is 42” long and made of Polyphenylene Sulfide and fibreglass which makes it durable and really flexy.

The deck houses all of the electronics which is great because it helps to protect those fragile components from debris and is makes the board look stealthy and like one cohesive unit.

The top of the deck hasn’t got your regular sand-based skate grip tape. Instead, it has a rubber grip tape that is great.

At first, I thought it was a bit gimmicky, but it is actually very functional.

 It’s just as sticky as regular grip tape, but it has the added benefits of not ripping up your hands or getting stuck on your clothes and it is super easy to clean.

There’s this very useful handle at the nose of the deck that you can use to roll the board around because it is heavy and cumbersome to try and carry around. 

There’s one other awesome feature of the deck I want to talk about and that’s the quick-swap battery.

You turn a latch, pull the plate up and you have easy access to the battery.

Change the battery over and you’ve got yourself some more range.

How much range that is, we’ll talk about in just a sec.

Trucks

The Maxfind FF AT has 11.4” double-kingpin trucks which feel amazing.

 They are well balanced, in that they are very carvy but also maintain their stability at high speeds.

 I only felt a slight oncoming of speed wobbles right at the top end of the speed test.

 These trucks are a little hard to configure because the deck side bolts sit too close to the top hanger so you can’t get a regular skate tool around it. You’ll have to use a spanner or a shifter.

Maxfind does supply a spanner, however, I felt like it was just a tad too small. I really had to work hard to get the spanner on and off the nut.

Wheels

The Maxfind FF AT has 165mm rubber tyres which are not pneumatic, meaning you don’t need to pump them up with air.

I love this because it removes any possibility of getting a puncture and you don’t need to check your tyre pressure ever!

As for rideability and how they feel, they’re actually really great.

They soak up almost all of the vibrations from the roads and they take on off-road terrain effortlessly.

When you’re riding on the road or footpath, I nearly can’t feel a thing. It’s just so comfortable.

Motors, Top Speed and Hill Climbing

The most interesting thing about the Maxfind FF AT is that it is running hub motors inside it’s all-terrain wheels.

We’ve seen other manufacturers try to attempt this, but none compare to the quality and performance of the FF AT.

It has dual 1500W hub motors which are expected to hit a top speed of 28mph (45kph) and climb hills of up to a 35% hill grade.

Out on my top speed test, I was able to hit a top speed of 24.7mph (39.8kph) which is slightly lower than their marketed speed.

I do feel like the board was still accelerating before I backed off, which I did because as I mentioned earlier,I started to feel some wobbles.

For the hill climb, I’m really happy with how it performed.

Starting from the right side of this graphic, I hit the steepest part of the hill which was 14% and the speed steadily decreased down to 19kph. After that it sarted to pick back up to 25kph as the hill flattened a little to 10%.

For hub motors, that’s pretty good considering it’s only just below what some belt-motor eboards will get.

The majority of riders aren’t going to have any issues climbing hills on this electric skateboard.

Ride Experience

I rode for over an hour and I didn’t get any fatigue in my legs or feet.

Usually, I’m starting to feel it after about 45 minutes of riding but the combination between the deck flex, soft bushings and rubber AT tyres soaked up almost all of the vibrations and kept me feeling fresh the entire time.

I think the double kingpin trucks and the concave on the deck made turning so easy that I hardly had to use any energy at all to control the board.

The carving is really good, it was probably what I enjoyed most about riding this eBoard.

As for high-speed riding, it did a pretty good job, I did get a little wobbly at times, but that’s nothing a little tightening of the trucks can’t fix.

Final thoughts

Overall, I am loving the Maxfind FF AT.

It’s a great all-terrain electric skateboard that gives you the freedom to pretty much ride anywhere.

It’s comfortable making it perfect for commuters looking for an alternative option to their car or walking.

And it carves really well, so you can have a lot of fun on this electric skateboard.

That’s it, that’s my Maxfind FF AT electric skateboard review.

I hope I’ve helped you on your journey to find the best electric skateboard that’s right for you.

Ride safe out the eSkaters.

See you soon.

Use Code ESKATEHUB to get 5% OFF

This article was reposted from www.eskatehub.com

Shop now

Related Posts

THE BEST ALL TERRAIN EBOARD 

May 12, 2022 Shopify API 

Liquid error: Error in tag 'section' - 'sezzle-widget' is not a valid section type